Photographic
A Commitment to Performance and Quality...
1.875"
Camera Auto-Focus Sensor Component
Tension Ring
Tension Ring
- .010" thick "Nizn" coated 1008 steel
- .005" thick DuPont Kapton insulating washer
- Automatically assembled with Bostik adhesive
4 1/2"
Bellows Assembly
- Internal Camera component to prevent stray light from striking the unexposed film. Consists of 2 epoxy painted stampings, 2 electro plated stampings, 2 springs, and 4 hinge pins.
- Assembled, tested, gauged, and cell packed.
4 1/8"
Front Plate
Internal Camera Component
Internal Camera Component
- Used to mount the electronics and shutter release mechanism
2.1/2"
to
2.7/8"
to
2.7/8"
Shutter Blades
- .005 thick polyester film with proprietary coatings to reduce friction and prevent static build up. Three different blades make up an assembly and are stamped simultaneously in one tool and ejected onto a stacking device in the correct order; top - middle - bottom.
- Sizes ranging from 2 1/2" to 2 7/8".